Front Cage Kits


SKU: N/A Category:


This is a DIY cage kit that will add affordable support to your factory cage without you needing a bender or notch any tubes. The kits ships UPS.


  • A-pillars are a 1 piece tube design all the way to the floor.
  • Tubes follow the factory lines so your door surrounds will still work.
  • Factory soft and hardtops still work flawlessly.
  • A-pillars and the horizontal windshield tubes are left a little long at the bottom to accommodate for damaged or modified tubs. Neither requires a notch to be made as they are straight cuts.
  • The cage is made using North American manufactured 1.75”o.d. x .120 wall ASTM A513 Type 5, C1020 DOM tubing which is most commonly referred to as seamless tubing in the off road and high performance industries although that is incorrect. The cold working process “DOM” works the weld area to produce a sound, dense, and homogeneous structure comparable to that of the base metal. The weld line disappears, causing DOM tube to be virtually seamless. The surface is superior to that of regular seamless tubing, since the material has been cold drawn from strip steel.
  • You do NOT need to dissemble the dash for installation. Detailed instructions will walk you through how to form the ductwork to allow enough room for the tube to pass behind the dash.
  • Detailed instructions with pictures are included.
  • CNC cut windshield and foot plates on the Trail Series.
  • CNC cut foot plates on the Rock Series.
  • Includes everything from the main Jeep loop forward. Does not include the rear overhead cross tube.
  • Trail Series Ties into the windshield for support and maintain the factory lines. The factory horizontal windshield tubes and bolt up bracket are replaced for a much stronger design and material.
  • The Rock series is the same as the Trail Series except none of the tubing terminates at the windshield so when your windshield is down, it’s a smooth transition for when you sliding across obstacles.


  • Assembly will require welding. If you want to easily remove the cage for painting, leave the foot plates off on the A-pillars until after paint and re installation.
  • Any welding process can be used during assembly. Most commonly used process is MIG (GMAW) with an E70 series welding wire and 25/75 shielding gas mixture.
  • Unlikely however some fitting maybe required if your Jeep is well used and abused. Maybe you should check out our full cage kit or 6 point frame tie in kit.
  • Bolts are not included for the foot plates as too many variations exist with all the rocker guard options.
  • Installation is always available by us. Call or email for details and pricing.

Optional add ons:

  • Universal tubular gussets – installed into the upper A-pillar corners. $36 pair
  • Harness tube for behind the front seat. $90
  • Harness tube for behind the rear seat. $90
  • Rear overhead cross tube. $75 – $90 This will limit the back seat headroom for taller passengers.
  • Dash V tube. $45 – $55 Will limit visibility some
  • 6 point frame tie in kit. $180 2005&06 will need the charcoal canister relocated.
  • Weld in seat belt or harness bung. $9ea
  • Custom fabrication work available. Call or email for details.

Additional information

Weight N/A
Dimensions N/A
Cage Series

Trail Series, Rock Series


There are no reviews yet.

Be the first to review “Front Cage Kits”

Your email address will not be published. Required fields are marked *